Canon Service tool v3400 Free Download. After changing parts such as ink absorbents, print heads, and printer mainboards, Canon Service Tool is used to service and reset Canon printers. Based on the various cases we’ve seen, the Service Tool is most often used to reset the waste ink counter value when the waste ink absorber is full. When the waste ink absorber reaches capacity, it must be replaced or cleaned. Once the waste ink absorber has been replaced or cleaned, the repairs proceed by resetting the waste ink counter value. The Service Tool may be used to reset the waste ink counter value.
Also Read: Canon Service Tool v5306 Free Download
Canon Service tool v3400 Free Download
General Tool was the first name given to the tool required to reset this Canon printer. The Service Tool may be used to reset Canon printers. General Tool was most likely launched in 2004, then again in 2012, and so on till now. According to the information we have, both General Tool and the Service Tool have several versions, each of which is used to reset a certain type of device. If you receive the error code 005 while using the Service Tool, it implies that the Service Tool you’re using doesn’t support your printer. Reading the Service Manual page for the printer being repaired is the best approach to determine which version of the Service Tool is compatible with that printer.
Canon Service Tool v3400
If the printer Service Manual is not available on the internet, how will you know which Service Tool is right for our printer? According to our research, comparing the year the printer was constructed with the year the Service Tool was introduced is the best way to locate an appropriate service tool for a printer. You should use the 2015 Service Tool if your printer was introduced in 2015. If you try to reset a printer from 2015 using the Service Tool from 2012, you’ll get an error code of 005, indicating that the Service Tool doesn’t support the newer printers. It is being worked on at the moment. When using the 2016 version of the Service Tool to reset a printer.
How to enter in Service mode?
- To enter Service Mode,
- press the Stop/Reset/Resume
- Cancel button (adjust your printer to see what buttons are available)
- The Starts/Power/On/Off button (adjust your printer to see what buttons are available) in a certain order.
How to reset the canon service tool v5103?
- First, get the Resetter Tool.
- It should be extracted.
- The paper should be loaded.
- Clear the Ink Counter and choose MAIN (1).
- Organize (2).
- Wait for D=000.0 to finish printing on the printer.
- Click the OK button.
- Service Tool should be closed.